Foam Hardware and Equipment – SFFECO

Hydraulic Concentrate Control Valve

JAYARAJ IMMANUEL — Sun, 06 Aug 2017 11:15:11 +0000

Hydraulic Concentrate Valve is designed for use in bladder tank foam systems or inline balance pressure proportioning system. The valve opens automatically when water supply is established through the inlet pipe of ratio controller of the bladder tank or in the inline balance pressure proportioning system. The valve opens at a minimum pressure of 3 Kgs (42.8 PSI) water pressure. No electric power is required to operate the valve.

SFFECO Has been a leading manufacturer of fire fighting products in the middle east and has built relationships and partnerships in over 100 countries. We produce products that meet international standards and quality with relevant certifications. All our products are manufactured at our state of the art manufacturing facility in Dubai which spans over 40,000 square meters.

SFFECO Global believes in PRODUCING TRUST IN FIRE AND SAFETY. We are a one stop shop for all your requirements and needs. With over 3 decades of experience and expertise we have been able to deliver custom products based on requirements of customer and local authorities.

Foam Generator

JAYARAJ IMMANUEL — Sun, 06 Aug 2017 11:02:37 +0000

SFFECO Foam Generator is a high expansion device which is suitable for total flooding application in areas like basement, mines, tunnels, cable ducts and warehouses. It is powered by water turbine and aero foil fan, all that is required for operation is a pressurized water supply and a high expansion foam concentrate. Ideally suited for rapid smoke extraction and positive pressure ventilation. Our foam generators also are effective in controlling fuel spill fires and wildland fire timber breaks.

SFFECO Foam Generator is built using stainless steel or alloy metal coated with corrosion resistant material and powder coated to ensure excellent resistance to hard weather and environmental conditions.

Foam Eductor

JAYARAJ IMMANUEL — Sun, 06 Aug 2017 10:47:56 +0000

Foam Eductors provide the simplest and most economical method of introducing a metered flow of foam concentrate into a pressurized water stream. The pressurized water stream creates a vacuum which is used to suck foam concentrate into the eductor body. The dosing of the concentrate is controlled by either an orifice plate or a metering valve. The concentrate enters and mixes with the water stream. The foam solution exits through the outlet of the inductor.

Rim Seal Pourer

JAYARAJ IMMANUEL — Sun, 06 Aug 2017 10:22:20 +0000

SFFECO Rim Seal Pourer is used to protect the vertical open top floating roof also known as OFTR. The rim seal pourer produces expanded foam and pours it in a mass flow in case of an emergency. Made from stainless steel or metal alloy the Rim Seal Pourer is coated with non-corrosion material to ensure that it can withstand harsh weather conditions and environmental wear and tear.

Air Foam Chamber

JAYARAJ IMMANUEL — Thu, 03 Aug 2017 13:14:16 +0000

SFFECO Air foam chambers consist of a foam expansion chamber and an integral foam maker with a stainless steel screened air inlet. Each air foam chamber includes an orifice plate, two inlet gaskets, vapor seal assembly, cover gasket, and an outlet gasket. The required deflector (split or shallow) and optional mounting pad assembly are sold separately.

The foam deflector directs the foam stream down the tank sidewall to lessen the submergence of the foam and agitation of the fuel surface. The split deflector allows for either bolting or welding to storage tanks when installation may be performed from both sides of the tank wall as with newly constructed tanks. The split deflector also allows for insertion of the deflector through the flange opening from the outside wall as is often required with tanks already in service.

Inline Inductor

JAYARAJ IMMANUEL — Thu, 03 Aug 2017 13:08:57 +0000

SFFECO Inline Inductor is designed mainly to be used in fixed installations and provide a simple yet reliable way of proportioning foam concentrates in a consistent flow application. SFFECO Inline Inductor is manufactured from stainless steel or metal alloy based of requirements and use. It is coated with corrosion resistant materials for a long life and for protection against harsh weather conditions.

We aim to deliver best in class products as per international standards to ensure maximum safety and reliability, each of the Inline inductor is calibrated at our state of the art factory to ensure that it is a perfect match for the suppression system as per requirement.

Ratio Controller – Proportioner

JAYARAJ IMMANUEL — Thu, 03 Aug 2017 12:36:03 +0000

SFFECO Ratio Controller – Proportioner is a device made to manage, monitor and dispense the right amount of foam concentrate in the water stream over a wide range of flow and pressure. The controller is also designed to not reduce the pressure a lot while it is dispensing the concentrate into the water stream. SFFECO Ratio Controller – Proportioner is UL Certified and is designed and produced as per international standards. Typical applications include flammable liquid storage tanks, loading racks, aircraft hangars, and heliports or anywhere flammable liquids are used, stored, processed or transported.

Not all types of fires can be fought with just water, some require other agent types of suppression systems and one such suppression agent is the Foam. Foam is a stable aggregation of bubbles which is lower in density helping it float and form a blanket over most liquids like oil and water. The ability to blanket most liquids helps cut the oxygen supply to the burning material resulting in extinguishing fire.

SFFECO has been manufacturing foam systems and equipment’s since inception. Our products comply with international standards and carry relevant certifications. Foam systems which we offer are

Total Flooding System
Local Application System
Portable Foam Generating Systems

Foam Nozzles and Equipment

JAYARAJ IMMANUEL — Thu, 03 Aug 2017 12:24:13 +0000

SFFECO Foam Nozzles and Sprinkler are air aspirating discharge heads produced to function with foam suppression systems. All our Foam Nozzles and Sprinklers are made from stainless steel or metal alloy for durability and optimum performance. Built as per international standards and carry required certificate, SFFECO Foam nozzles and sprinklers are designed to efficiently fight against fire.

Available in a range of sizes and dispensing types like straight, jet and spread, SFFECO Foam nozzles will fit all your requirements. Not all types of fires can be fought with just water, some require other agent types of suppression systems and one such suppression agent is the Foam. Foam is a stable aggregation of bubbles which is lower in density helping it float and form a blanket over most liquids like oil and water. The ability to blanket most liquids helps cut the oxygen supply to the burning material resulting in extinguishing fire. Like all firefighting and suppression systems, foam system also is built with specific materials and equipment’s designed to be efficient and effective

Contact us for any inquiries and quotations. You can all write to us if you require more information. Follow us on social media to get the latest news and updates.

Foam Monitors

JAYARAJ IMMANUEL — Thu, 03 Aug 2017 12:12:17 +0000

Foam monitors are jets which is used to dispense huge quantities of foam precisely, consistently and at a fast rate to the burning areas from a distance where it is safe for fire fighters. SFFECO Foam Monitors are designed to deliver foam from long and safe distance at the rate of upto 50,000 lpm. Foam Nozzles available on the monitor can be adjusted beam, jet of straight flow to handle the type of foam agent being dispensed.

SFFECO Provides a wide range of foam monitor options which are built as per international and is UL listed. Foam monitors are available if portable fixed, manual and automatic types and sizes. Our range of monitors fits all our customer requirements and local authority requirements.