Neonatal Ambulances are designed to provide fast, comfortable and safe transport of patient in any medical emergencies especially for neonatal Transportation. The ambulance is equipped with various medical equipment suitable for first-aid treatment of patient anytime, anywhere with provision to mount and use Transport Incubator and related equipment for neonatal use. The spacious and flexible interior room offers the best condition in neonatal care for its functionality and accessibility, with its properly designed storage compartments.

FEATURES

• Aerodynamic roof design incorporated with LED warning lights (2 clear flashers & 2 red flashers & 2 oscillators) for greater visibility
• Ergonomically designed interiors with optimal lighting (roof lights, handheld light wired to driver’s seat base with options for mounting)
• Mulitplex control for heater or A/C systems as per treatment/patient care requirements (with pre-wiring for inverter)
• Dual protection with inside/outside locking latches for the double doors
• 2 rows of LED fluorescent dome lighting in interior ceiling with dimmer
• Advanced control with separate frontal and rear OEM console for power distribution to emergency lights points and sirens
• Hand-held 500,000 CP spotlight with momentary switch, hard wired, to driver’s seat base with alternate option of mounting location
• 200-watt siren with Microphone located in front console and 2 nos 100-watt drivers mounted under front bumper
• Modular equipment paneling
• Body graphics, custom designing, and painting of ambulance (including window-tinting)

MEDICAL EQUIPMENT

• Main Roll-in Stretcher with mattress, restraints and fixations
• Emergency Foldable Stretcher with Wheels
• Spinal Board with Restraints
• Head Immobilizer
• Cervical Collar – 6 pcs. Set with Bag
• Manual Resuscitation Kit (Adult, child & Infant)
• Combination Stair Chair Stretcher
• Wall Mounted Sphygmomanometer with adult and pediatric cuff
• Dual Head Stethoscope (Adult and Child)
• Traction Splint set (Adult & Child)
• Splint Kit 5 pcs. set of Flexible Splint
• Extrication Device
• Eco Air Splint – Inflatable Splint Set 6 pcs
• Automated External Defibrillator
• Pulse Oximeter
• Accu-chek Active Blood Glucose Meter
• Portable Suction Device
• Portable Oxygen Cylinder
• CPR Board
• Professional Emergency Kit (with BLS Consumables)
• First Aid Kit – Wall mounted
• Medical Waste Bin / Sharp Container
• Hand Held Spot Light
• Portable Mini Refrigerator

WARNING SYSTEM

• Light Bar, Front (red/white/blue)
• Dual mode Flasher
• Grill Lights
• Intersection lights
• Red Warning Lights
• Two Scene Lights
• Loading Lights
• Signal Lights
• Siren & PA System
• Observation Camera with LCD Screen
• Intercom System
• Two-way Radio Communication System

The EN Standard ambulance is ergonomically designed for all the medical emergencies. The ambulance is designed according to CEN 1789 Standard. The patient cabin is designed in such a way to make the patient comfortable, safe and quick treatments and good transportation with all the supporting medical devices and accessories. Mercedes sprinter 324 KA is ideal for EN Standard Ambulance

EN STANDARD AMBULANCE FEATURES

• Body & General Construction
  Ambulance all interior is made in ABC plastic and covered with white and non-fading gel.
• Insulation
  Acoustic and Thermal insulation in side walls and roof of patient cabin
• Flooring
  The Ambulance Flooring is covered with Marine grade Plywood, 18 mm thick, Heavy-Duty Vinyl anti-slip, anti-static and Liquid Proof. The Vinyl has “Raised Edges” to ensure a complete Seal of the Floor.
• Partition
  Installation of a partition wall to separate front and rear compartment made in ABC Plastic and covered with white and non-fading gel-coated GRP, shock-proof and resistant against detergents and disinfectants.
• Medical Cabinets
  Action area consists of medical equipment brackets for Defibrillator, Patient Monitor (standard) for other additional equipments brackets will be made as per the client request and equipment needed.
  A Separate oxygen cylinder cabinets for two 48 CFT oxygen cylinder.
  Shelves and consumable rack will be installed in the left side of the patient cabinet.
• Attendant Seats
  One Doctor Seat and one attendant seats Sliding, Ergonomically correct seat back with Lumbar Support, Minimize Neck and Back injuries with the extra Headrest. 3-point Safety Belt for Maximum Safety and Seating Comfort
• Intravenous (IV) Holders
  Two IV hook brackets aluminum coated with Velcro straps mounted on Ceiling.
• Over-Head Grab Rail
  An over-head grab rail fixed on the ceiling

MEDICAL EQUIPMENT

• Main Roll-in Stretcher with mattress, restraints and fixations
• Emergency Foldable Stretcher
• Spinal Board with Restraints
• Head Immobilizer
• Cervical Collar
• Manual Resuscitation Kit
• Combination Chair Stretcher
• Wall Mounted Sphygmomanometer with adult and pediatric cuff
• Dual Head Stethoscope
• Laryngoscope Kit Complete
• Traction Splint set
• Extrication Device
• Eco Air Splint
• Flex All Splint
• Defibrillator with Monitor
• Glucometer
• Pulse Oximeter
• Ventilator
• Disposable Ventilator
• Cardiac Impedance Device
• Ultra Sound
• Portable Nebulizer
• Portable Suction Device
• EZ IO kit
• Syringe Pump
• Infusion Pump
• Portable Oxygen Cylinder
• First Aid Kit
• CPR Board
• ALS Consumables
• Portable Mini Refrigerator

WARNING SYSTEM

• 1 x LED Light bar over the front roof (red white red)
• Electronic Siren with PA 300 amplifier, microphone and 100 W speakers
• 2 x Scene lights (White) 9×7 Series on each side and at rear and one (1) at front middle side.
• Two Strobe LED lights at the rear side.
• 2 x Flashing lights (red/blue) 7×3 series on the front grill.
• 8 x round type 7”diameter LED white lights located in two rows.
• Cabinet Lights
• Intercom system with hands free operation for both driver and paramedic
• Provision for radio communication system on request

The Patient Transport is an ambulance designed to provide a comfortable and safe transport of patient in any medical emergencies. The ambulance is equipped with various medical equipment suitable for first-aid and basic life support treatment of patient anytime, anywhere. The spacious and flexible interior room offers the best condition in patient care for its functionality and accessibility, with its properly designed storage compartments. Finally, all installation and design of the Patient Transport satisfies the requirement of every customer with utmost attention to quality, durability and reliability.

FEATURES

• Ceiling: Made of ABS sheet with foam insulation.
• Interior Lights: 2 units Twin tube fluorescent lamps 16 watts recessed mounting on the ceiling.
• Hand Rail: Made of 1” stainless tube mounted on the ceiling.
• IV Holder: Fold-able IV Holder mounted on the ceiling. One (1) over the main patient area and one (1) over the Squad Bench.
• Air Condition: Additional A/C evaporator for the patient area.
• Flooring: Made of marine plywood covered with heavy duty vinyl flooring, 5cm. rolled up on the sides with aluminum trim.
• Partition wall: Made of ABS sheet with foam insulation.
• Cabinetry: Made of Aluminum bent sheet with aluminum profile for the clear acrylic sheet sliding cover with continues handle Powder coat finished.
• Cabinets: With aluminum profile sliding frame and with 5mm. transparent solar bronze poly-carbonate with edge handle.
• Action Area: Placed along with the cabinetry, on the right side of the Patient Stretcher
• Control Switches: Placed on the Action Area and Consul Box at the Driver’s Cabin
• Folding Stretcher Compartment: Placed along with the cabinetry, on the rear entrance portion of the vehicle with belts to secure the folding stretcher
• Squad Bench: Made of Aluminum sheet fabricated with upholstery and backrest with safety belts underneath is a compartment tools and medical equipment. With gas prop to hold the top cover. Powder coat finished.

MEDICAL EQUIPMENT

• Roll-in Cot main Stretcher (Manual or Auto loading)
• Fold-able secondary stretcher
• Cervical Collar different size (set of 6)
• Head Immobilizer
• First Aid Kit

WARNING SYSTEM

• Front light bar
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• Flashers
• 2 Grill Lights
• Intersection Lights
• Warning Lights
• Load/Backup Lights
• Siren and Siren Speakers

Techniq International’s First Responder Ambulance, provides preliminary life-saving first-aid treatment till the patient gets advanced medical attention. First Responder provide affordable, innovative transportation solutions to the medical community.

First Responder FEATURES

• Ceiling: Made of ABS sheet with foam insulation.
• Interior Lights: 2 units Twin tube fluorescent lamps
• 16 watts recessed mounting on the ceiling.
• Hand Rail: Made of 1” stainless tube mounted on the ceiling.
• IV Holder: Fold-able IV Holder mounted on the ceiling. One (1) over the main patient area and one (1) over the Squad Bench.
• Air Condition: Additional A/C evaporator for the patient area.
• Flooring: Made of marine plywood covered with heavy duty vinyl flooring, 5cm. rolled up on the sides with aluminum trim.
• Partition wall: Made of ABS sheet with foam insulation.
• Cabinetry: Made of Aluminum bent sheet with aluminum profile for the clear acrylic sheet sliding cover with continues handle Powder coat finished.
• Cabinets: With aluminum profile sliding frame and with 5mm transparent solar bronze poly-carbonate with edge handle.
• Action Area:Placed along with the cabinetry, on the right side of the Patient Stretcher.
• Control Switches: Placed on the Action Area and Consul Box at the Driver’s Cabin
• Folding Stretcher Compartment: Placed along with the cabinetry, on the rear entrance portion of the vehicle with belts to secure the folding stretcher
• Squad Bench: Made of Aluminum sheet fabricated with upholstery and backrest with safety belts underneath is a compartment tools and medical equipment. With gas prop to hold the top cover. Powder coat finished.

MEDICAL EQUIPMENT

• Roll-in Cot main Stretcher (Manual or Auto loading)
• Foldable secondary stretcher
• Resuscitator Adult with Overpressure Valve
• Cervical Collar different size (set of 6)
• Dual Head Stethoscope
• Wall-Mounted Sphygmomanometer
• Portable O2 Cylinder – D Size with regulator
• Head Immobilizer
• First Aid Kit

WARNING SYSTEM

• Front light bar
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• Flashers
• 2 Grill Lights
• Intersection Lights
• Warning Lights
• Load/Backup Lights
• Siren and Siren Speakers

Mobile ICU is a well-equipped Intensive Care Ambulance. Mobile ICU offers the same diagnostic and treatment facilities as a stationary hospital ICU, but when clients are in search of lower cost options with regard to the installed equipment, it offer the best of both worlds. It offers not only an unbeatable price-performance ratio, but also maximum system safety. It has room for highly trained paramedics, who are dispatched to emergency situations, where patients require a higher level of care than a regular ambulance can provide. It is equipped with state-of-the-art Advanced Life Support (ALS) systems, and is designed for ambiance – light, space, compartments – to support paramedics to provide life-sustaining assistance.

FEATURES

• Aerodynamic roof design incorporated with LED warning lights (2 clear flashers & 2 red flashers & 2 oscillators) for greater visibility
• Ergonomically designed interiors with optimal lighting (roof lights, handheld light, ect.)
• Mulitple control for heater or A/C systems as per treatment/patient care requirements (with prewiring for inverter)
• Dual protection with inside/outside locking latches for the double doors
• 2 rows of LED / Halogen fluroscent, dome lighting in interior ceiling with dimmer
• Advanced control with separate front and rear OEM console for power distribution to emergency lights points and sirens
• Hand-held spotlight with momentary switch, hard wired, to driver’s seat base with alrenate option of mounting location
• 200-watt electronic siren with Microphone located in front console and 2 nos. of 100-watt speaker mounted under front bumper
• Modular equipment paneling
• High end Body graphics designing and painting of ambulance (including frosted Windows)

MEDICAL EQUIPMENT

• Roll-in Cot Main Stretcher (Manual or Auto loading)
• Foldable secondary stretcher
• Spine Board with restraint set
• Resuscitator Adult with Overpressure Valve
• Cervical Collar different size (set of 6)
• Dual Head Stethoscope
• Wall-Mounted Sphygmomanometer
• Portable O2 Cylinder – D Size with regulator
• Portable Suction Unit
• Defibrillator – AED
• Ventilator
• Pulse Oximeter
• Syringe Pump & Infusion Pump
• Stair Chair stretcher
• Head Immobilizer
• Scoop Stretcher
• Traction Devices
• Extrication Devices
• First Aid Kit
• Cardiac Monitor
• Vacuum Mattress

WARNING SYSTEM

• Front light bar
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• Flashers
• 2 Grill Lights
• Intersection Lights
• Warning Lights
• Load/Backup Lights
• Siren and Siren Speakers

Type 3 Ambulances are built on a chassis-cab of light duty van, offering a roomy interior for extensive medical equipment and an optimal ergonomic work environment for EMS specialists. Chassis is the only difference between Type 1 and 3. Besides, Type 3 has a shorter wheel base than Type 1, which makes it more easily maneuverable in heavy traffic conditions. They are used mostly at airports, chemical plants and oil refineries with medical equipment for Advance Life Support.

FEATURES

• Aerodynamic roof design incorporated with LED warning lights (2 clear flashers & 2 red flashers & 2 oscillators) for greater visibility
• Ergonomically designed interiors with optimal lighting (roof lights, handheld light etc.)
• Mulitple control for heater or A/C systems as per treatment/patient care requirements (with prewiring for inverter)
• Dual protection with inside/outside locking latches for the double doors
• 2 rows of LED / Halogen fluroscent, dome lighting in interior ceiling with dimmer
• Advanced control with separate front and rear OEM console for power distribution to emergency lights points and sirens
• Hand-held spotlight with momentary switch, hard wired, to driver’s seat base with alrenate option of mounting location
• 200-watt electronic siren with Microphone located in front console and 2 nos. of 100-watt speaker mounted under front bumper
• Modular equipment paneling
• Access door / Window between driver and patients cabins
• High end Body graphics designing and painting of ambulance (including frosted Windows)

MEDICAL EQUIPMENT

• Roll-in Cot main Stretcher (Manual or Auto loading)
• Foldable secondary stretcher
• Spine Board with restraint set
• Resuscitator Adult with Overpressure Valve
• Cervical Collar different size (set of 6)
• Dual Head Stethoscope
• Wall-Mounted Sphygmomanometer
• Portable O2 Cylinder – D Size with regulator
• Head Immobilizer
• First Aid Kit
• Portable Suction Unit
• Stair Chair stretcher
• Scoop Stretcher

WARNING SYSTEM

• Front light bar(Red Flashers, Clear Flashers and oscillators)
• Siren and Siren Speakers
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• 2 Grill Lights
• 2 Intersection Lights
• 10 Warning Lights
• Load/Backup Lights

Type 2 Ambulances are built on a van-type chassis. They are used to transport patients who require Basic Life Support, though they can also be customized to equip for Advanced Life Support. The design facilitates optimum maneuverability, greater fuel efficiency and cost-effectiveness with interiors that can be easily sanitized. They are used most commonly by hospitals and the Ministry of Health. Type 2 Ambulances are available as high-roof or low-roof variants.

FEATURES

• Aerodynamic roof design incorporated with LED warning lights (2 clear flashers & 2 red flashers & 2 oscillators) for greater visibility
• Ergonomically designed interiors with optimal lighting (roof lights, handheld light, ect.)
• Mulitple control for heater or A/C systems as per treatment/patient care requirements (with prewiring for inverter)
• Dual protection with inside/outside locking latches for the double doors
• 2 rows of LED / Halogen fluroscent, dome lighting in interior ceiling with dimmer
• Advanced control with separate front and rear OEM console for power distribution to emergency lights points and sirens
• Hand-held spotlight with momentary switch, hard wired, to driver’s seat base with alrenate option of mounting location
• 200-watt electronic siren with Microphone located in front console and 2 nos. of 100-watt speaker mounted under front bumper
• Modular equipment paneling
• High end Body graphics designing and painting of ambulance (including frosted Windows)

MEDICAL EQUIPMENT

• Roll-in Cot main Stretcher (Manual or Auto loading)
• Foldable secondary stretcher
• Spine Board with restraint set
• Resuscitator Adult with Overpressure Valve
• Cervical Collar different size (set of 6)
• Dual Head Stethoscope
• Wall-Mounted Sphygmomanometer
• Portable O2 Cylinder – D Size with regulator
• Head Immobilizer
• First Aid Kit
• Portable Suction Unit
• Stair Chair stretcher
• Scoop Stretcher

WARNING SYSTEM

• Front light bar
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• Flashers
• 2 Grill Lights
• Intersection Lights
• Warning Lights
• Load/Backup Lights
• Siren and Siren Speakers

Type 1 Ambulances use a traditional truck-like chassis built with unique features, such as full-length, all-aluminium extruded door construction to provide for maximum storage access without compromising on structural integrity. Innovatively designed storage compartments provide optimal ergonomic work environment for EMS specialists, while facilitating extensive medical equipment storage. They are used mostly at airports, chemical plants and oil refineries, with medical equipment for Advanced Life Support.

FEATURES

• Aerodynamic roof design incorporated with LED warning lights (2 clear flashers & 2 red flashers & 2 oscillators) for greater visibility
• Ergonomically designed interiors with optimal lighting (roof lights, handheld light wired to driver’s seat base with options for mounting)
• Mulitplex control for heater or A/C systems as per treatment/patient care requirements (with pre-wiring for inverter)
• Dual protection with inside/outside locking latches for the double doors
• 2 rows of LED fluorescent dome lighting in interior ceiling with dimmer
• Advanced control with separate frontal and rear OEM console for power distribution to emergency lights points and sirens
• Hand-held 500,000 CP spotlight with momentary switch, hard wired, to driver’s seat base with alternate option of mounting location
• 200-watt siren with Microphone located in front console and 2 nos 100-watt drivers mounted under front bumper
• Modular equipment paneling
• Body graphics, custom designing, and painting of ambulance (including window-tinting)

MEDICAL EQUIPMENT

• Spencer (Italy) Carrera Tec Auto loading stretcher
• Spencer B Life resuscitator Adult with Overpressure Valve
• Spencer Cervical Collar different size (set of 6) New York
• Technician chair with arm rest, 3-point seat belt 360 degree rotatable and retractable
• Power Distribution and Control Centre
• Left side CPR seat or full wall cabinetry
• Dual Head Stethoscope Littman USA
• Wall-Mounted Sphygmomanometer
• Dual-bottle, swing down style
• Jumbo blower exhaust fan
• 2 OEM radio speakers in patient compartment ceiling
• Central Oxygen System
• Portable Suction Unit
• IV holders and hooks
• Assist Rail Grab Handles
• First Aid Kit
• Portable O2 Cylinder
• Fire extinguisher with holder

WARNING SYSTEM

• Front light bar
• 2 x beacon lights at rear
• 2 turn lights mounted on intermediate side of body
• Flashers
• 2 Grill Lights
• Intersection Lights
• Warning Lights
• Load/Backup Lights
• Siren and Siren Speakers