EJ Type models are basically Electric Driven and Jockey pump combinations. They consist of Mainly an End Suction Pump driven by Electric motor and no Standby Pumps. It is also combined with a Jockey Pump for maintenance to make a complete packaged skid.

The Complete EJ Type skid, is assembled along with all discharge line accessories and are connected to a Skid Mounted Control Panel.

The Available EJ Type Fire Pump Skid Packages are available in the below flow Capacities.
50, 120, 150, 250, 300, 350, 500, 750 & 1000 GPM.

SFFECO Standard Pump Packages are offered in complete skid mounted units. Each skid unit includes High Quality Horizontal Split Case or End Suction pumps which are coupled with Heavy duty drivers, Electric Motor or Diesel Engine. The accessories are also assembled in the same unit and skid, like Gate Valves, Check Valves, Flexible Joint, Pressure Switches and Pressure Guage, are fitted along with supporting header. All these components are pre-piped, wired and fabricated on a Common Compact Skid, and are operated as a fully automatic unit via the use of the latest design of Control Panels.

We provide innovatively designed combinations & models to suit customer and project requirements. We are also equipped to provide customized design and solutions for and special hazard applications. We have different combinations which are detailed below.

DJ Type models are basically Diesel and Jockey pump combinations. They consist of Mainly an End Suction Pump driven by Diesel Engine and no Standby Pumps. It is also combined with a Jockey Pump for maintenance to make a complete packaged skid.

The Complete DJ Type skid, is assembled along with all discharge line accessories and are connected to a Skid Mounted Control Panel.

The Available DJ Type Fire Pump Skid Packages are available in the below flow Capacities.
50, 120, 150, 250, 300, 350, 500, 750 & 1000 GPM.

SFFECO Standard Pump Packages are offered in complete skid mounted units. Each skid unit includes High Quality Horizontal Split Case or End Suction pumps which are coupled with Heavy duty drivers, Electric Motor or Diesel Engine. The accessories are also assembled in the same unit and skid, like Gate Valves, Check Valves, Flexible Joint, Pressure Switches and Pressure Guage, are fitted along with supporting header. All these components are pre-piped, wired and fabricated on a Common Compact Skid, and are operated as a fully automatic unit via the use of the latest design of Control Panels.

We provide innovatively designed combinations & models to suit customer and project requirements. We are also equipped to provide customized design and solutions for and special hazard applications. We have different combinations which are detailed below.

EDJ Type models are basically Electric, Deisel and Jockey pump combinations. They consist of Mainly an End Suction Pump driven by Electric Motor along with a Standby Pump which is a Diesel Engine Driven End Suction Pump. It is also combined with a Jockey Pump for maintenance to make a complete packaged skid.

The Complete EDJ Type skid, is assembled along with all discharge line accessories and are connected to a Skid Mounted Control Panel.

The Available EDJ Type Fire Pump Skid Packages are available in the below flow Capacities.
50, 120, 150, 250, 300, 350, 500, 750 & 1000 GPM.

SFFECO Standard Pump Packages are offered in complete skid mounted units. Each skid unit includes High Quality Horizontal Split Case or End Suction pumps which are coupled with Heavy duty drivers, Electric Motor or Diesel Engine. The accessories are also assembled in the same unit and skid, like Gate Valves, Check Valves, Flexible Joint, Pressure Switches and Pressure Guage, are fitted along with supporting header. All these components are pre-piped, wired and fabricated on a Common Compact Skid, and are operated as a fully automatic unit via the use of the latest design of Control Panels.

We provide innovatively designed combinations & models to suit customer and project requirements. We are also equipped to provide customized design and solutions for and special hazard applications. We have different combinations which are detailed below.

Occasionally in a Fire Pump system, water leakage will occur at flanged or threaded pipe connections, valve stems, stuffing boxes, etc. This normal loss of water will lower the system pressure gradually until the main Fire Pump is required to start. To minimize wear on the Fire Pump resulting from unnecessary operation, a Jockey Pump is recommended for the system. In a Jockey Pump system a small pump, motor, and controller/pressure switch unit is installed in the piping system.

When the water pressure drops below the pre-set level, the pressure switch energizes a starter which activates the Jockey Pump. Correct water pressure is therefore maintained at all times. An optional minimum run timer will prevent the Jockey Pump from being started too frequently. This timer will ensure operation for a minimum of 3 minutes. If a fire should start, the pressure will continue to drop and the main Fire Pump will start. Automatic controllers also include a “Hand-Off Automatic” selector switch for manual operation.

This component plays a vital role in fire pumps as it controls the entire system. It is selected as per customer choice if any, otherwise it can be either TORNATECH, FIRETROL, HUBBLE LEXINGTON OR JOSLYN CLARKE.

Electric Fire Pump Controllers in general are classified by starting method, as full voltage or reduced voltage starting. The distinguishing factor in these starting methods is the amount of current (amperage) that is drawn by the motor during it’s initial starting process (inrush).

Fire controllers are generally provided in single unit but we provide individual controller to all individual units. SFFECO Provides controllers for the following applications

• Electric Pump Control
• Diesel Pump Control
• Jockey Pump Control
• Alarm Panel

SFFECO offers listed Centrifugal Fire Pump Skids that meet every fire protection need.

The Motor Driven Skids are available coupled with certified Electric Motors and SFFECO Certified Centrifugal Fire Pumps. The details are given below.

• Driven by Listed & Approved Fire Pump Electric Motors..
• Well aligned and Coupled for Direct Operation.
• Skid Packages are Pre-Tested and Inspected thoroughly before release to customers.
• One piece base plate with Anchor Bolt holes.
• Engineered, coated, hot rolled mild steel to resist corrosion and abrasion.
• Heavy Fabricated C-Channel Structure constructed to provide proper alignment of Pump with
• Diesel Engine or Pump.
• Compact skid Design with Small Foot-Print for Retro fit.
• High standard of Quality in material Construction finish and Workmanship.

SFFECO maintains its standard with using it’s proudly own listed & approved WEG High Efficiency Fire Pump Motors and Centrifugal Fire Pumps to package Heavy Duty and High Quality Compact Skids.

Our Listed and Approved Fire Pumps can also be coupled with any other Listed Electric Motor of any specific brand as per customers requirement.

SFFECO offers listed Centrifugal Fire Pump Skids that meet every fire protection need.

The Diesel Driven Skids are available coupled with certified Diesel Engines and SFFECO Certified Centrifugal Fire Pumps. The details are given below.

• Driven by Listed & Approved Diesel Engines.
• Well aligned and Coupled for Direct Operation.
• Skid Packages are Pre-Tested and Inspected thoroughly before release to customers.
• One piece base plate with Anchor Bolt holes.
• Engineered, coated, hot rolled mild steel to resist corrosion and abrasion.
• Heavy Fabricated C-Channel Structure constructed to provide proper alignment of Pump with
• Diesel Engine or Pump.
• Compact skid Design with Small Foot-Print for Retro fit.
• High standard of Quality in material Construction finish and Workmanship.

SFFECO maintains its standard with using it’s proudly own listed & approved Black Stallion Diesel Engines and Centrifugal Fire Pumps to package Heavy Duty and High Quality Compact Skids.

Our Listed and Approved Fire Pumps can also be coupled with any other Listed Diesel Engine of any specific brand as per customers requirement.

FIRE PUMP FEATURES

• Designed and built as per UL 448 AND NFPA20
• Dynamically Balanced Impeller
• Constructed in variety of metallurgies
• Available in 50 Hz and 60 Hz
• Drivers with gear boxes at electrical and diesel speed
• Designed for easy maintenance
• Open line shaft
• Packaged systems available
• Self-Venting Design eliminates vapor lock
• Efficiently Designed Shaft
• Heavy wall thickness
• Sealing arrangement is packing design
• Modular Construction
• Space-saver design

Flow Meter employs an innovative swivel mechanism that allows the meter to be inserted into tappings as small as 1/2-inch, making it an ideal means to adding metering capabilities without the need to install a separate in-line flow meter.

SFFECO Has been a leading manufacturer of fire fighting products in the middle east and has built relationships and partnerships in over 100 countries. We produce products that meet international standards and quality with relevant certifications. All our products are manufactured at our state of the art manufacturing facility in Dubai which spans over 40,000 square meters.

SFFECO Global believes in PRODUCING TRUST IN FIRE AND SAFETY. We are a one stop shop for all your requirements and needs. With over 3 decades of experience and expertise we have been able to deliver custom products based on requirements of customer and local authorities.